SDRPlay RSP1B SDR prijímač 1kHz-2GHz

Kód: RSP1B
150,85 € 125,71 € bez DPH
Skladom
Môžeme doručiť do:
10.12.2024

SDRPlay RSP1B je vylepšená verzia SDRPlay RSP1A, obľúbeného prijímača s najnižšou cenou. Je to výkonný širokopásmový plne vybavený 14-bitový SDR a perfektný ako univerzálny komunikačný prijímač pre všeobecné pokrytie a oveľa viac.

Detailné informácie

Certifikovaný predajca
Certifikovaný predajca
Motorola, Caltta, eChat, SDRplay, Expert Electronics
Doručenie do 2 dní
Doručenie do 2 dní
v rámci Slovenskej republiky
Osobný odber
Osobný odber v Košiciach
Možná platba kartou
Poštovné zdarma
Poštovné zdarma pri objednávke
do SR nad 300 €
do ČR nad 400 €

Podrobný popis

The SDRPlay RSP1B is an enhanced version of the SDRPlay RSP1A the popular lowest cost receiver—it is a powerful wideband full featured 14 bit SDR and perfect as an all round general coverage communications receiver plus much much more.

The key advantages over the RSP1A are that it comes in strong black painted steel case instead of plastic, and (compared to the RSP1A) has significantly improved noise performance below 1MHz (i.e for LF and below), and in the 50-60 MHz region. There are also noticeable noise improvements in the 3.5-5.5MHz and 250-320MHz spectrum. It also has it has improved signal handling at HF frequencies compared to the RSP1A.

The SDRPlay RSP1B covers the complete radio spectrum from 1kHz (VLF) to 2GHz (Microwaves) with up to a massive 10MHz visible bandwidth and the companion SDRuno software has all the popular ham bands and shortwave broadcast bands as “presets” for instant set-up.

To check compatibility with your choice of computer hardware, operating system and SDR application software, go to www.sdrplay.com/downloads/

SDRPlay RSP1B main advantages and features:

  • New, enhanced version of the RSP1A in a rugged black painted steel case 
  • Improved noise performance below 1MHz and in the 3.5-5.5MHz, 50-60 MHz and 250-320MHz ranges 
  • Improved signal handling at HF frequencies 
  • Covers all frequencies from 1kHz through VLF, LF, MW, HF, VHF, UHF and L-band to 2GHz, with no gaps 
  • Receive, monitor and record up to 10MHz of spectrum at a time 
  • 14-bit ADC silicon technology for excellent dynamic range 
  • Multiple high-performance preselect filters minimize phantom signal problems 
  • Software selectable AM/FM & DAB broadcast band notch filters minimise intermodulation problems from strong interferers 
  • Multiple individual receivers in any 10MHz  slice of spectrum 
  • Free use of Windows-based SDRuno software (check website for versions supported) 
  • Free use of SDRconnect SDR and server software for Windows, MacOS and Linux (Check website for versions supported) 
  • Multiplatform driver and API support including Windows, Linux, Mac and Raspberry Pi 4/5 
  • Powers over the USB cable with a simple, robust type B socket 
  • Software selectable 4.7V Bias-T for powering an external remote antenna amplifier 
  • Calibrated S meter/ RF power and SNR measurement 
  • Compatible with many 3rd Party software digital decoders 
  • Documented API provided to allow demodulator or application development on multiple platforms 
  • Strong and growing software support network 

SDRPlay RSP1B application areas:

  • Amateur  Shortwave radio listening
  • Broadcast DXing (AM/FM/TV)
  • Panadaptor
  • Aircraft (ADS-B and ATC) 
  • Slow Scan TV
  • Multi-amateur band monitoring
  • WSPR & digital modes
  • Weather fax (HF and satellite)
  • Satellite monitoring
  • Geostationary environmental satellites
  • Trunked radio
  • Utility and emergency service monitoring
  • Fast and effective antenna comparison
  • Industrial Spectrum Analyser
  • Surveillance
  • Wireless microphone monitoring
  • RF surveying
  • IoT receiver chain
  • Signal logging
  • RFI/EMC detection
  • Broadcast integrity monitoring
  • Spectrum monitoring
  • Power measurement
  • Educational/Scientific
  • Teaching
  • Receiver design
  • Radio astronomy
  • Passive radar Ionosonde
  • Spectrum analyser
  • Receiver for IoT sensor projects
  • Antenna research

Please note: This product launched in February 2024 and initially only SDRplay software and APIs were released by SDRplay. Other 3rd Party software may not yet be compatible with the RSP1B. Please check specific 3rd Party application for compatibility via www.sdrplay.com/third-party

NEW SDRconnectTM SDR software for Windows, MacOS and Linux/Raspberry Pi:

  • All new intuitive graphical interface launched in 2023
  • Highly integrated native support for the SDRplay family on  Windows,  MacOS, and Linux/Rasberry Pi 4/5
  • Multiple ‘virtual receivers’ for simultaneous reception and  demodulation of different types of signals within the same receiver bandwidth
  • Multiple notch filters with BW adjustable to 1Hz
  • Synchronous AM mode with selectable/adjustable sidebands
  • Calibrated RF Power Meter with > 100dB of usable range
  • Calibrated S-Meter supporting IARU S-Meter Standard
  • Integrated server allows remote cross-platform access via high speed LAN and regular internet WAN connectivity
  • “Audio” (Compact) mode allows limited bandwidth WAN connections with spectrum visibility up to 10MHz plus multimode audio access (AM/Wideband FM/SSB/CW etc)
  • Rolling release model allows for future feature enhancements
  • Modular approach for future 3rd party development

SDRunoTM for Windows features:

  • Highly integrated native Windows support for the SDRplay family
  • Up to 16 ‘virtual receivers’ for simultaneous reception and demodulation of different types of signals within the same receiver bandwidth
  • An integrated frequency scanner (for frequency ranges and stored memory panel lists)
  • A selectivity filter with an ultimate rejection greater than 140dB
  • A unique distortion-free double stage AGC with fully adjustable   parameters
  • AFC for FM signals
  • Multiple notch filters with BW adjustable to 1Hz + Notch Lock feature
  • A unique synchronous AM mode with selectable/adjustable sidebands, dedicated PLL input filter, & selectable PLL time constants
  • SNR (stereo noise reduction), featuring a proprietary noise reduction algorithm for stereo broadcast
  • Powerful wideband noise filter for addressing common sources of RFI (e.g. power supplies, internet over DSL etc.)
  • Calibration for receiver frequency errors
  • RDS support optimised for low signal environment
  • Active Noise cancelling
  • CAT and Omnirig control
  • Calibrated RF Power Meter with > 100dB of usable range
  • Calibrated S-Meter supporting IARU S-Meter Standard
  • The ability to save power (dBm) and SNR (dB) measurements over time, to a CSV file for future analysis
  • IQ output accessible for 3rd party applications

You can find more information on the following sites:

IMPORTANT NOTICE!

SDR radios have no control panel, therefore manufacturers do not supply a user manual. Our company only sells SDR hardware; operation of these devices requires various software that you can download from the internet.  Most of these software products are only available for download in the English language from the websites of manufacturers and third-party developers (many of them radio amateurs) either for free or for a fee. Installation, setup and usage of the software require an intermediate level of proficiency in computing and the English language. We do not advise buying this equipment unless you are in possession of these required skills, and we highly recommend seeking assistance and prior information from other radio hams on internet-based forums and user groups.

For SDRplay products, we recommend you to purchase the USB printer cable that we sell. Other USB cables may generate a lot of electromagnetic noise which may interfere with reception.

 

SPECIFICATIONS
General
Weight 315g
Size 98mm x 94mm x 35mm (case only)
Low Current 185 mA (excl bias T)
Connectivity Single 50Ω RF connector (SMA socket)*, USB 2.0 (high speed) type B socket
Frequency Range
Continuous coverage 1kHz – 2GHz
ADC Characteristics Sample frequency:2 – 10.66MSPS, 14-bit native ADC (2 – 6.048MSPS), 12-bit (6.048- 8.064 MSPS), 10-bit (8.064- 9.216MSPS), 8-bit (> 9.216 MSPS )
Bias T Software Selectable 4.7V @ 100mA
Reference High Temperature Stability (0.5ppm) TCXO, In-field trimmable to 0.01ppm.
Maximum recommended input power 0dBm continuous, 10dBm for short periods
Typical Noise Figures 22dB@300kHz, 18dB @ 2MHz, 18dB @ 4MHz, 15dB @ 12MHz, 15dB @ 25MHz, 15dB @ 40MHz, 5.3dB @ 55MHz, 3.3dB @ 100MHz, 3.3dB @ 200MHz, 4dB @ 275MHz, 7.7dB @ 386MHz, 3.6dB @ 660MHz, 5.0dB @ 1500MHz, 6.3dB @ 1800MHz
IF Modes Zero IF, All IF bandwidths, Low IF, IF bandwidths = 1.536MHz
IF Bandwidths (3dB) 200kHz, 300kHz, 600kHz, 1.536MHz, 5.0MHz, 6.0MHz, 7.0MHz, 8.0MHz
Front End Filtering Automatically configured front end filtering:
Low Pass 2MHz
Band Pass 2-12MHz, 12-30MHz, 30-60MHz, 60-120MHz, 120-250MHz, 250-300MHz, 300-380MHz, 380-420MHz, 420-1000MHz
High Pass 1000MHz
Notch Filters
FM Filter >50dB 85 – 100MHz
MW Filter >30dB 660 – 1550kHz
DAB Filter >30dB 165 – 230MHz
Note The notch filters above are software selectable and remove specific broadcast bands.
* we recommend the use of an SMA (male) plug on a cable or “pigtail” - avoid large adapters like SMA to SO239 which may place too much strain on the SMA socket. Make sure the plug has a centre pin

Buďte prvý, kto napíše príspevok k tejto položke.

Nevypĺňajte toto pole:

Buďte prvý, kto napíše príspevok k tejto položke.

Nevypĺňajte toto pole: